Power handling up to 2 x 20 Amps, For 4-cell or 5-cell NC or NiMH batteries; cell count freely selectable using "jumpers", 5 channels
remotely accessed from the receiver 5 two-way signal amplifiers, 16 servo sockets on the backer, Interference suppression for all
16 servo inputs (no ferrite rings required), Two independent, IC-controlled voltage monitors (LED chains), Two external ultra-bright
warning LEDs
Minimum voltage memory (low voltage memory) for both batteries, can be read individually Operating voltage range 4.0
to 8.0 Volts,Temperature range -10° to +55° C Voltage loss approx. 0.25 Volts
Current drain 25 mA Weight only 90 grammes
Power handling up to 12 Amps For 4-cell or 5-cell NC or NiMH batteries; cell count freely selectable using "jumpers" Two independent
voltage monitors (LED chains) Two external ultra-bright warning LEDs Minimum voltage memory (low voltage memory) for both batteries,
can be read individually Operating voltage range 4.0 to 8.0 Volts Temperature range -10° to +55° C Voltage loss approx. 0.25 Volts
Current drain 20 mA Weight only 42 grammes
Power handling up to 2 x 20 Amps, For 4-cell or 5-cell NC or NiMH batteries; cell count freely selectable using "jumpers",
Double "low-drop" voltage stabilisation of the receiver current at 4.0 A, 7 channels remotely accessed from the receiver, 7 two-way
signal amplifiers, 24 servo sockets on the backer, Interference suppression for all 24 servo inputs (no ferrite rings required), Two
independent, IC-controlled voltage monitors (LED chains), Two external ultra-bright warning LEDs, Minimum voltage
memory (low voltage
memory) for both batteries, can be read individuall, Operating voltage range 4.0 to 8.0 Volts, Temperature range -10° to +55° C, Voltage
loss approx. 0.25 Volts, Current drain 25 mA
Weight only 122 grammes
Double linear voltage stabilisation for receiver and servos, supplying 5.90 Volts Power handling up to 2 x 10 Amps,For 7.4 Volt
LiPo batteries (PowerBox Battery) or 5-cell NC or NiMH batteries, 5 channels remotely accessed from the receiver 5 two-way signal
amplifiers,16 servo sockets on the backer, Interference suppression for all 16 servo inputs (no ferrite rings required) Independent
IC-controlled voltage monitors (LED chains) Two external ultra-bright warning LEDs, Minimum voltage memory (low voltage memory) for
both batteries, can be read individually,Two integral electronic switches, controlled by the SensorSwitch, Operating voltage range
4.0 to 9.0 Volts, Temperature range -10° to +55° C, Voltage loss approx. 0.35 Volts, Current drain 25 mA, Weight only 115 grammes
complete with all cables and SensorSwitch
Double linear voltage stabilisation for receiver and servos, supplying 5.90 Volts Power handling up to 2 x 20 Amps, For 7.4
Volt LiPo batteries (PowerBox Battery) or 5 NC or NiMH cells, 7 channels remotely accessed from the receiver, 7 two-way signal Amplifiers,
24 servo sockets on the backer, Interference suppression for all 24 servo inputs (no ferrite rings required), Independent, IC-controlled
voltage monitors (LED Chains), Two external ultra-bright warning LEDs, Minimum voltage memory (low voltage memory) for both batteries,
can be read individually, Two integral electronic switches, controlled by the SensorSwitch, Operating voltage range 4.0 to 9.0 Volts
Temperature range -10° to +55° C, Voltage loss approx. 0.35 Volts, Current drain 25 mA, Weight only 148 grammes complete with all
cables and SensorSwitch
Double linear voltage stabilisation for receiver and servos, supplying 5.90 Volts Power handling up to 2 x 20 Amps, For 7.4
Volt LiPo batteries (PowerBox Battery) or 5 NC or NiMH cells, 7 channels remotely accessed from the receiver, 7 two-way signal Amplifiers,
24 servo sockets on the backer, Interference suppression for all 24 servo inputs (no ferrite rings required), Independent, IC-controlled
voltage monitors (LED Chains), Two external ultra-bright warning LEDs, Minimum voltage memory (low voltage memory) for both batteries,
can be read individually, Three control channels (12 servos) individually adjustable and programmable, Operating voltage range 4.0
to 9.0 Volts, Temperature range -10° to +55° C, Voltage loss approx. 0.35 Volts, Current drain 30 mA, Weight only 160 grammes complete
with all cables and SensorSwitch
PowerBox Systems presents this new, revolutionary and ground-breaking form of Lithium-Polymer battery for your receiver power supply,
complete with battery mount. Maximum capacity 2800 mAh
Final charge voltage 8.40 Volts Charge voltage for internal charger max. 10.5
Volts Temperature range during discharge process 0° to +60° C Temperature range during charge process 0° to +40° C
Weight including
cables 158 grammes Weight of mounting frame 18 grammes
PowerBox "Sensor"Specification:Power handling up to 5.0 Amps (according to heatsink), For 7.4 Volt LiPo batteries (PowerBox Battery)
or 5 NC or NiMH cells, Two independent linear voltage regulators,
supplying 5.90 Volts,Two independent electronic switches SET button
for On / Off switching protection, LED indicators for both power circuits Operating voltage range 4.0 to 9.0 Volts Temperature range
-10° to +75° C Voltage loss approx. 0.35 Volts Weight only 35 grammes incl. all cables
Power Switch with dual power control only 35 gramms! Power handling up to 12 Amps
For use with batteries consisting of 4 or
5 NC or NiMH cells, freely Selectable
Working voltage range: 4.0 V to 8.0 V Temperature range: -10° to +55° C Voltage loss: 0.25 V
Weight only 35 grammes
2 switches including 1 charging cable
This unit was the first contribution from PowerBox Systems to a programme aimed at significantly improving electronic security
in large models. The PowerSwitch has been continuously developed since its introduction in 1992, and since 2001 it has been widely
used all over the world in large models, offering stable, ultra-reliable technology. The units are individually hand-made. Four double
silver-plated contacts, mounted in a floating suspension, are used to switch the positive conductor only; the negative line is looped
through without any contacts at all. Two ball latches hold the switch in the selected position even when subjected to severe vibration.
The two connecting cables (blue / red) which run to the receiver (or to another consumer unit) consist of silicone wire of 0.34 mm²
cross-section. Always connect both plugs to the receiver: one to the Socket marked "B", and the second to any vacant channel output
socket.
| |
Description |
Price |
Buy now |
| PB40/16 |
POWERBOX EXPERT 40/16
|
£106.95 |
|
| |
Description |
Price |
Buy now |
| PB BASIC |
POWERBOX BASIC
|
£63.95 |
|
| |
Description |
Price |
Buy now |
| PB-PROFESSIONAL 40/24 |
POWERBOX PROFESSIONAL 40/24 |
£142.00 |
|
| |
Description |
Price |
Buy now |
| PB-EVOLUTION 40/16 |
POWERBOX EVOLUTION 40/16
|
£142.00 |
|
| |
Description |
Price |
Buy now |
| PB-COMPETETION 40/24 |
POWERBOX COMPETETION 40/24
|
£213.95 |
|
| |
Description |
Price |
Buy now |
| PB-CHAMPION 40/24 |
POWERBOX CHAMPION 40/24
|
£248.00 |
|
| |
Description |
Price |
Buy now |
| PB-LP -BAT |
POWERBOX LI-POLY BAT 2800
|
£85.95 |
|
| |
Description |
Price |
Buy now |
| PB-SENSOR |
POWERBOX SENSOR
|
£63.96 |
|
| |
Description |
Price |
Buy now |
| PB-12 |
POWERBOX 12
|
£35.95 |
|
| |
Description |
Price |
Buy now |
| PB-SWITCH |
POWERBOX SWITCH |
£21.95 |
|
| |
Description |
Price |
Buy now |
| PB-SWITCH-2 |
POWERBOX DUAL SWITCH WITH CHARGE LEADS |
£42.95 |
|
